haross1
Jan 21, 01:57 AM
I had a Graphire bluetooth. The only problem is that it dropped the bluetooth connection occassionally. I still have the Graphire but I recently bought an Intos 4. The only thing I don't like about the Intos is that it takes up more desk space than the Graphire. Most of the space is for buttons and controls that I don't use. Both are excellent devices. I use them for photo editing in Photoshop. Can't live without one.
benhollberg
Mar 14, 10:59 AM
What position in line are you all at?
EGT
Sep 11, 04:44 PM
I came home from work, turned on the TV and sat there watching the events unfold in disbelief. I didn't know how to react but i do remember being extremely angry. It was just shocking.
We'd just been in New York two years prior to 9/11. I'd recored the whole trip with my video camera. A short bit of it included the Trade Centre ... standing right at the bottom looking straight up.
On September 14th I was at a Radiohead concert in Belfast. Thom Yorke dedicated Street Spirt "to all the Americans trying to get back home".
Very moving.
We'd just been in New York two years prior to 9/11. I'd recored the whole trip with my video camera. A short bit of it included the Trade Centre ... standing right at the bottom looking straight up.
On September 14th I was at a Radiohead concert in Belfast. Thom Yorke dedicated Street Spirt "to all the Americans trying to get back home".
Very moving.
MacForScience
May 6, 08:38 PM
Hey guys,
I have a powermac g4 digital audio I believe, 700 mhz processor. I also have 2 powermac g3's I believe the fastest that created. 400 mhz or something like that. I have another g4 with the 350 processor that I can test the power control which with but it would be a pain because my grandparents are using it so it would take a while to get it unhooked/dug out, they use it as a paper holder behind a desk cords and everything are ran through the desk.
Here's my 3 questions:
1. The Powermac g4 when you push the power button it lights up but when you release it goes out. The logicboard does not respond. Should I buy a new power control module or is there a way to use the one from the g3, it looked different at first glance.
2. To run a home server is it better to run a g4 with the faster processor or a g3 with more ram, the g3 has 4 slots the g4 only 3.
3. Best way to use as a media server I was thinking put everything into itunes and use the homesharing, is that available in tiger? Is that the best way to do it?
It will be used with apple tv, macbook, powerbook, ibook, imac g5, xbox 360?
Thanks in advance for the advice.
Here's the short version:
1. Which powermac to use as a server?
2. Best way to do media server?
1.) The logic board is fried. (Don't buy a new one)
2.) Niether, you probably don't need a server and even if you do a G3 or G4 is simply to slow for the job. Buy yourself a bottom of the line Mac Mini with an external RAID 1 drive for your media server "needs". Also make sure you get 4GBs minimum on the RAM.
3.) Get 10.5/10.6 if you have intel and run something like Plex.
Cheers
I have a powermac g4 digital audio I believe, 700 mhz processor. I also have 2 powermac g3's I believe the fastest that created. 400 mhz or something like that. I have another g4 with the 350 processor that I can test the power control which with but it would be a pain because my grandparents are using it so it would take a while to get it unhooked/dug out, they use it as a paper holder behind a desk cords and everything are ran through the desk.
Here's my 3 questions:
1. The Powermac g4 when you push the power button it lights up but when you release it goes out. The logicboard does not respond. Should I buy a new power control module or is there a way to use the one from the g3, it looked different at first glance.
2. To run a home server is it better to run a g4 with the faster processor or a g3 with more ram, the g3 has 4 slots the g4 only 3.
3. Best way to use as a media server I was thinking put everything into itunes and use the homesharing, is that available in tiger? Is that the best way to do it?
It will be used with apple tv, macbook, powerbook, ibook, imac g5, xbox 360?
Thanks in advance for the advice.
Here's the short version:
1. Which powermac to use as a server?
2. Best way to do media server?
1.) The logic board is fried. (Don't buy a new one)
2.) Niether, you probably don't need a server and even if you do a G3 or G4 is simply to slow for the job. Buy yourself a bottom of the line Mac Mini with an external RAID 1 drive for your media server "needs". Also make sure you get 4GBs minimum on the RAM.
3.) Get 10.5/10.6 if you have intel and run something like Plex.
Cheers
myjay610
Mar 14, 12:04 PM
I second setting up a local DNS, you could use BIND on an existing mac or recycle an old PC and install BIND on linux, use os x server, etc.
Other things to consider, if your hosts are obtaining IP addresses via DHCP you'll have to configure your DHCP server to assign the local DNS server IP address, right now it's probably assigning the IP address of your router/gateway you'll also need to set the search domain for your hosts so you don't have to type full domain names everytime.
If hosts have static IPs don't forget to manually set the DNS server IP and search domain.
On your DNS server, just set the forwarder IP address to what the DNS IPs are in your current router configuration, your ISPs DNS or you could just use OpenDNS servers which is what I usually do if I set up a local DNS server.
Did a quick search on the web and found this: http://www.macshadows.com/kb/index.php?title=How_To:_Enable_BIND_-_Mac_OS_X's_Built-in_DNS_Server ... could be useful. If you browse around enough you could find a way to do it on an existing Mac w/o installing server OS.
Other things to consider, if your hosts are obtaining IP addresses via DHCP you'll have to configure your DHCP server to assign the local DNS server IP address, right now it's probably assigning the IP address of your router/gateway you'll also need to set the search domain for your hosts so you don't have to type full domain names everytime.
If hosts have static IPs don't forget to manually set the DNS server IP and search domain.
On your DNS server, just set the forwarder IP address to what the DNS IPs are in your current router configuration, your ISPs DNS or you could just use OpenDNS servers which is what I usually do if I set up a local DNS server.
Did a quick search on the web and found this: http://www.macshadows.com/kb/index.php?title=How_To:_Enable_BIND_-_Mac_OS_X's_Built-in_DNS_Server ... could be useful. If you browse around enough you could find a way to do it on an existing Mac w/o installing server OS.
AppleTecFan
May 5, 11:01 PM
Does your roommate use the same computer? Some DVD drives do not like certain dvd's. I've always used verbatim and have had no problems.
Sent from my iPhone using Tapatalk
I am using maxell , I heard verbatim are the best but I dont want to waste the money when I am not able to burn them myself .
Sent from my iPhone using Tapatalk
I am using maxell , I heard verbatim are the best but I dont want to waste the money when I am not able to burn them myself .
fireshot91
Apr 18, 06:38 PM
We pay $45 monthly for 15down/10up.
It'll be around that for everything.
It'll be around that for everything.
jeffosx
Jul 4, 03:27 AM
Hi all, I have photoshop and illustrator in which I make diagrams and label charts figures etc. These ultimately end up in a word document as reports etc.
I cant work out how to take nice looking figures with dropshadows, transparency and in particular, text and keep it looking good for word. Somehow the text ends up fuzzy and graphics look like crap. I have tried tiff, gif, jpg eps and they all seem to look crap. Are there any other options apart from not using word. I have used inDesign to get around this but it doesnt help when someone needs to work on it and Indesign takes a fair bit of effort sometimes to get it looking smart...
any help appreciated.
Cheers
I cant work out how to take nice looking figures with dropshadows, transparency and in particular, text and keep it looking good for word. Somehow the text ends up fuzzy and graphics look like crap. I have tried tiff, gif, jpg eps and they all seem to look crap. Are there any other options apart from not using word. I have used inDesign to get around this but it doesnt help when someone needs to work on it and Indesign takes a fair bit of effort sometimes to get it looking smart...
any help appreciated.
Cheers
Caolan96
Oct 12, 02:40 PM
I bought the origianal Bose SoundDock when it was first released and have Been in love with it ever since. I also bought the Bose Companions and love them just as much. If I were you I would try and eventually purchase both, you won't regret it. But buy the companion speakers first. That way you have the Bose quality for you music plus films and gaming. Then when the funds are available treat yourself to the SoundDock!
thanks man, appreciate you helping out, your the only reply, jeez what is this forum coming too,
regards,
Caol�n.
thanks man, appreciate you helping out, your the only reply, jeez what is this forum coming too,
regards,
Caol�n.
maturola
Mar 31, 10:30 AM
This makes me sad. :mad:
Nothing to be sad about, Apple have a lot talented (as talented as these Hackers) engineers testing and researching the firmware, at some point they will find same holes and exploits as the hackers, that is their job, other time they won't. It is the nature of the development cycle.
Nothing to be sad about, Apple have a lot talented (as talented as these Hackers) engineers testing and researching the firmware, at some point they will find same holes and exploits as the hackers, that is their job, other time they won't. It is the nature of the development cycle.
iJohnHenry
Apr 16, 03:14 PM
Not me.
I am comfortably dumb in that area. :)
I am comfortably dumb in that area. :)
mark-mcd
Apr 18, 05:50 PM
I just got one of these (Graphite 500mhz DV SE model) for dirt cheap too (�10.50!). I intend to stick it in the garage and use it as a music player!
To answer your question it is indeed fanless and should be more or less silent. The issue I have is that the original 30GB Maxtor hard drive sounds like a jet turbine with marbles in it - let's hope your drives are quieter ;)
To answer your question it is indeed fanless and should be more or less silent. The issue I have is that the original 30GB Maxtor hard drive sounds like a jet turbine with marbles in it - let's hope your drives are quieter ;)
ChicoWeb
Feb 8, 03:20 PM
Magento is built for Ecommerce. It's bloated like OSC, but there is a big support structure, and it's more modular then OSC for your plugings and themes. We do everything in Magento and Magento Enterprise now.
kiwi_the_iwik
Jul 20, 04:29 PM
Hi there...
Now that I've talked most of my friends into getting a Mac - and now iChat - we're finding it really easy to communicate.
Until recently, it's been dead easy to transfer files between each other, by just clicking and dragging the document onto the text box, and pushing <enter>.
From there, the files are sent to the recipient, where they are saved to a folder on their computer. I can SEND data OK - it's just the receiving of data that has been disallowed. The error I get goes something along the lines of:
"The downloads folder is Read-Only, or you do not have sufficient privileges to do this."
The problem has just occurred - I've just upgraded my Hard Drive to 120Gb, and did a straight data transfer between the old and new drives, so all my preferences had not been changed, so THAT couldn't be the reason. I have, however, upgraded to iChatAV - which may be the culprit.
Has this happened to anyone else? Does anyone have a solution?
I've already tried repairing my preferences (to no avail), and I can't find any of the documents that were downloaded to me previously - and doing a "Find" search of the drive has come up with nothing.
Is there ANY way of changing the DESTINATION of my downloads for iChat? I have a specific Downloads folder for internet downloads, but (as far as I can see) there is no way to change the destination for iChat...
Cheers, all.
Hope you can help...
:confused:
Now that I've talked most of my friends into getting a Mac - and now iChat - we're finding it really easy to communicate.
Until recently, it's been dead easy to transfer files between each other, by just clicking and dragging the document onto the text box, and pushing <enter>.
From there, the files are sent to the recipient, where they are saved to a folder on their computer. I can SEND data OK - it's just the receiving of data that has been disallowed. The error I get goes something along the lines of:
"The downloads folder is Read-Only, or you do not have sufficient privileges to do this."
The problem has just occurred - I've just upgraded my Hard Drive to 120Gb, and did a straight data transfer between the old and new drives, so all my preferences had not been changed, so THAT couldn't be the reason. I have, however, upgraded to iChatAV - which may be the culprit.
Has this happened to anyone else? Does anyone have a solution?
I've already tried repairing my preferences (to no avail), and I can't find any of the documents that were downloaded to me previously - and doing a "Find" search of the drive has come up with nothing.
Is there ANY way of changing the DESTINATION of my downloads for iChat? I have a specific Downloads folder for internet downloads, but (as far as I can see) there is no way to change the destination for iChat...
Cheers, all.
Hope you can help...
:confused:
quicksilver77
Feb 6, 08:48 AM
Will this RAM work in the above mentioned MINI? I want to take it to at least 2gb. Not sure if its worth it to go to 3gb. Can i install this 2gb module and leave one of the 512mb in as well?
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820145172
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820145172
Full of Win
Apr 18, 10:13 AM
Well, I guess it will be the iPhone 4GS.
DaveP
Mar 23, 01:08 AM
Why don't you just split the audio with a Y adapter so that you don't have to switch it. It will just always be active. This to me seems like a cheaper and better solution.
Sounds like a good idea, it could be much cheaper.
Sounds like a good idea, it could be much cheaper.
killuminati
Sep 10, 11:05 PM
Aw I'm disappointed they removed it. I liked it!
I watched it twice.
I'm sure they got some complaints about it. Even though I really liked it, I think it was a bad decision by apple.
I watched it twice.
I'm sure they got some complaints about it. Even though I really liked it, I think it was a bad decision by apple.
Patmian212
Dec 17, 06:53 PM
If no one has dibbs can I have the ADB mouse and keyboard?
kainjow
Oct 24, 07:25 PM
And no doubt developers are in for a lot of work if they have to make all their applications 'flexible'
From my understanding, hopefully not too much work. Basically, bitmap images need to be replaced with vector images if possible (or high resolution versions - I think I read app icons should be 256x256...). Same goes for any custom GUI components (which usually just use bitmap images). Everything else is handled by the OS.
From my understanding, hopefully not too much work. Basically, bitmap images need to be replaced with vector images if possible (or high resolution versions - I think I read app icons should be 256x256...). Same goes for any custom GUI components (which usually just use bitmap images). Everything else is handled by the OS.
twoodcc
May 4, 10:55 PM
Sweet tomorrow 4-6!
Ive noticed youve been down for the last week :( Man that sucks :( that has to be hard. A lot of areas around me were also affected. My sister on the other side of town lost power for nearly 2 days when a big oak tree fell down on some power lines. Came close to their house. Just hope everyone is safe.
yeah it has not been fun. i had to take my family to my parents' place for the last 5-6 days. luckily none of my family was hurt, and we didn't have any damage.
Ive noticed youve been down for the last week :( Man that sucks :( that has to be hard. A lot of areas around me were also affected. My sister on the other side of town lost power for nearly 2 days when a big oak tree fell down on some power lines. Came close to their house. Just hope everyone is safe.
yeah it has not been fun. i had to take my family to my parents' place for the last 5-6 days. luckily none of my family was hurt, and we didn't have any damage.
KnUx
Mar 25, 12:27 PM
Pretty quick response to fixing the issue with 4th gen iPod Touches. Was getting really annoying. :)
I agree, I just bought the iPod Touch last month, I thought it was the hardware. Glad to know it wasn't.
I agree, I just bought the iPod Touch last month, I thought it was the hardware. Glad to know it wasn't.
digitalbiker
Oct 25, 12:04 AM
Yeah, sorry. Those too.:)
What do you mean? Are you talking about Leopard? Leopard will work with Core 2 Duo, Core Duo, PPC, probably everything back to about a 1997 model imac.
However Leopard will only provide 64 bit support to 64 bit capable chips, that would be G5 PPC and Core 2 Duo only.
What do you mean? Are you talking about Leopard? Leopard will work with Core 2 Duo, Core Duo, PPC, probably everything back to about a 1997 model imac.
However Leopard will only provide 64 bit support to 64 bit capable chips, that would be G5 PPC and Core 2 Duo only.
Spidermanjohn
Oct 9, 12:30 AM
http://www.hollywood.com/news/detail/id/3558779
A taste of things to come?
A taste of things to come?
No comments:
Post a Comment